Frequency Generation brand Hulda Clark Zappers

Original Plate Zapping Set Up

Dr. Hulda Clark updated the Zap Plate in 2004 to a more complex set up, In Parallel. The original version of the Zap Plate, which was set up In Series, is still very effective and popular due to being published in all of Dr. Clark's earlier books. Below you will find instructions on setting up a Zap Plate in the original way, In Series.

Converting a zapper into a single plate-zapper is easy. One hooks the Zapper's ground lead to a copper handle as usual, but then clip the positive (red) lead to a 3.5" aluminum Zap Plate. The Zap Plate is then attached to the remaining copper handle with an extra alligator lead.

Most set ups use a Double Zap Plate (more surface area for samples and slides). In this case both plates are wired together in series. Our Zap Plate below is a double zap plate design.

Hulda Clark Zap Plate in Series

How to set up a Frequency Generation brand Zap Plate in Series

To connect the Zap Plate in series you will only need the two short banana leads that came with the Zap Plate.

Start with the first short lead and connect the two plates in series on one side of the Zap Plate.

Using the second short lead, connect the Zapper's red (+) Positive output to the Zap Plate. Test your zapper if not sure which output is (+).

Plug the red lead that came with your Zapper into the remaining port on the Zap Plate.

Black (-) ground lead and copper pipe connects to Zapper as usual.

All information on ways to experiment with a Zap Plate is in Dr. Clark's books at:

Double Zap Plate set up in series
You may be wondering which book refers to which Zap Plate set up. Hulda Clark updates her books from time to time, yet to my knowledge, this is how it breaks down:
If you are reading Hulda Clark's book:
  • The Cure For All Cancers
  • The Cure For All Diseases
  • The Cure For All Advanced Cancers
  • The Syncrometer Science Lab Manual
  • The Cure For HIV and AIDS (updated 2003 version)
  • The Prevention of All Cancers
  • The Prevention and Cure of All Cancers
Set up this kind of Zap Plate:
In Series In Parallel
The Clark Zapper and Plate Zapper is not intended for use in the cure, mitigation, treatment, or prevention of any disease; not intended to affect the structure of any function of the body; not intended for medical or therapeutic purpose. The Zapper has not been evaluated or licensed as a medical device by the US FDA. Dr. Clark states to not experiment with a Zapper if pregnant or wearing a pace maker. All information is for educational purposes only. Talk with a health professional before attempting any self health program.

To set up a Hulda Clark Plate Zapper you will need, a 30 kHz Zapper and a Zap Plate. The Frequency Generation brand Zap Plate can be set up either in series or parallel depending on the book you are using to guide your experiments. Zapper and Zap Plate are sold separately below:

Hulda Clark Zapper comes with two copper handles, two banana-alligator leads, one 9 volt battery, and set up instructions.

Zap Plate comes with two short banana leads, two long banana leads, alligator clip, and set up instructions.

Zapper and Zap Plate sold separately

Plate Zapper (In Parallel) Set Up Instructions

Return to Cart

Customer Service

Privacy Statement